Shell and Tube heat exchangers are commonly used in heating or cooling process fluids and gases. Typically found in applications where need to heat or cool large volumes exist, however, small volume applications are also common.

Shell and tube heat exchangers come in many variations to meet proves requirements for almost every application or industry. They deliver reliable heat transfer performance by utilizing a high turbulence and counter flow, making one or more passes. One (1), two (2) and four (4) pass models are standard, custom multi-pass model of any are available.

1. CONNECTIONS: Standardized sizes for easy assembly. Additional thread and surface protection for clean installation.

2. TUBESHEET: U-bend tubes expanded into tubesheet allow for tube expansions and contractions due to thermal fluctations.

3. GASKETS: High quality compressed fibers (reusable).

4. HEAD: Standard cast-iron or steel head for heavy duty services (also available as a spare part).

5. MOUNTING: Saddles attached with standard units for quick & easy mounting.

6. BAFFLES: Punched baffles with minimum clearances between tubes assure correct fluid flow and minimized bypass.

7. SHELL: Welded shell protection with high quality paint for corrosion resistance.

8. TUBE BUNDLE: Stainless steel tubes allow for strong, durable performance over a wide range of applications. Unique tube bundle layout minimizes buildup problems at the edges and optimizes media flow in the units.

Shell & Tube EK Series

Copper & Steel Construction

FEATURES

• Compact Size
• High Efficiency Finned Bundle Design
• Low Cost
• Optional Patented Built-In Surge-Cushion Relief Bypass
• 3/16" Tube Size
• Heat Removal up to 400 Horsepower (300 kW)
• Oil Flow rates up to 80 U.S. GPM (300 Liters/min.)
• Large Oil Connections for Minimum Entering and Exiting Flow Restriction
• Removable End Bonnets for easy tube cleaning
• Mounting Brackets Designed so that Cooler can be Rotated in 90 degree increments
• High Pressure Ratings
• Complete Line of Accessories Available

Ratings

Maximum Pressure/Shell side: 500 psi

Maximum Pressure/Tubeshell side: 150 psi

Maximum Temperature: 250 degrees F

Materials

Shell:  Steel

Tube Sheets: Steel

Baffles: Steel

Mounting Brackets: Steel

Gaskets: Nitrate Rubber/Cellulose Fiber

Nameplate: Aluminum Foil

Tubes: Copper

Fins: Aluminum

End Caps: Grey Iron

Copper & Steel Construction

FEATURES

• Young Touchstone Interchange
  
• Optional Non-Ferrous Construction
• Competitively Priced
• 1/4" or 3/8" Tube Standard
• Water to Water Applications
• Optional 90/10 Copper Nickel Cooling Tubes and Bronze End Bonnets for Sea Water Service
• NPT, SAE O-Ring, SAE Flange, or BSPP Shell Slide Connections Available
• End Bonnets Removable for Servicing
• Mounting Feet Included (May be rotated in 90 degree increments)

Ratings

Maximum Pressure/Shell side: 250 psi

Maximum Pressure/Tubeshell side: 150 psi

Maximum Temperature: 350 degrees F

Materials

Tubes: Copper

Shell:  Steel or Brass

Hubs and Tube Sheets: Steel or Brass

Baffles: Steel

End Bonnets: Cast Iron

Mounting Brackets: Steel

Gaskets: Nitrate Rubber/Cellulose Fiber

Nameplate: Aluminum Foil

Copper/Steel or Stainless Steel Construction

FEATURES

• API/BASCO Interchange
• ASME Code Option
• Preferred for New Oil-Water Applications
• C-Series/SSC Series
• Rugged Steel Construction
• Low Cost
• Type 316 Stainless Steel Construction Optional
• Custom Designs Available
• Competitvely Priced
• Optional Material Construction on C-Series: Tubes, Tubesheets, End Bonnets
• NPT, SAE O-Ring, SAE Flange, or BSPP Shell Side Connections available
• End Bonnet Removable for servicing
• Mounting Feet Included (May be rotated in 90 degree increments)

Ratings Standard

Maximum Pressure/Shell side: 300 psi

Maximum Pressure/Tubeshell side: 150 psi

Maximum Temperature: 300 degrees F

Materials C Series

Tubes: Copper

Headers: Steel

Shell:  Steel

Shell Connections: Steel

Baffles: Brass

End Bonnets: Cast Iron

Mounting Brackets: Steel

Gaskets: Nitrate Rubber/Cellulose Fiber

Nameplate: Aluminum Foil

Copper & Steel Steel Construction

FEATURES

 
• ITT Interchange
• B or C Series is Recommended for New Applications
• Competitvely Priced
• Optional 90/10 Copper Nickel Cooling Tubes and Bronze End Bonnets for Sea Water Service
• NPT, SAE O-Ring, SAE Flange, or BSPP Shell Side Connections available
• End Bonnet Removable for servicing
• Mounting Feet Included (May be rotated in 90 degree increments)

Ratings

Maximum Pressure/Shell side: 300 psi

Maximum Pressure/Tubeshell side: 150 psi

Maximum Temperature: 300 degrees F

Materials

Tubes: Copper

Shell:  Steel

Hubs and Tube Sheets: Steel or Brass

Baffles: Brass

End Bonnets: Cast Iron

Mounting Brackets: Steel

Gaskets: Nitrate Rubber/Cellulose Fiber

Nameplate: Aluminum Foil